[Dr K]

Very cool.
I’m working on a build in Columbia SC. Right now I’m still trying to get the vitamin’s in, but I’ll be watching what you guys do. It looks like your a bit ahead of me in the converting to SAE, but I’m glad to follow.
Good luck and I’ll be posting as I go as well.

[Dr K]

This has been fixed, Thanks so much

[Dr K]

Here’s the link

http://sketchup.google.com/3dwarehouse/details?mid=cb498d810dfd31e885aaccba6f96ca0c

[Dr K]

OK it should be uploading now. The model is not done yet but I thought if some people have some time over the weekend and want to mess with their own version, no point in reinventing the wheel. It’s tagged as RepRap, Morgan, 3d, Quentin Harley.

On a funny note, I just found the front page of this site, for some reason I had the about morgan page linked and so never got the the main page. I’m going to start reading that, I think there’s a bunch there that will be helpful 🙂

[Dr K]

I’m back, it’s taking a bit longer than I hoped, some things came up that took my attention away. I’ve got a few more questions.
1: when you are referring to the right vs left is that looking at the front ( the arms are pointing towards me) or at the back ( arms pointing away from me. Another way to say it would be, are the slots on the sides of the arms both facing each other (the middle) or facing out.

The second question is about the z mount bracket. Is the STL file for the 12mm or 8mm build. I see 2 zbrackets and one is labeled for the 12mm version but is the other supposed to be for the 8mm build. when I import it doesn’t line up with the 2 outer rods.

Thanks

[Author]

Posts