Forum Replies Created
-
Posts
-
Hey sorry for the real late reply TimF if your still interested I’ll offload all the parts I already printed and assembled with my current morgan, excluding the hotbed. With the other projects i’m building it doesn’t look like i’ll finish it for some time, not looking to make any profit just the majority of the costs for the bearings etc.
I tried to pm you my email but it doesnt seem to exist anywhere here. I can put it on ebay if you want. Let me know.
Here are some pics I haven’t finished the assembly but everything works, just need to add the motors/belts etc.
Files I changed
http://www.filedropper.com/morganchangedfilesforau
Files/things that were changed from the default setup for au are the following
1: Morgan_arm_theta_a to accommodate 25mm tube but still use 608zz bearing.
2: Drivewheel_tube to accommodate 25mm tube but still use 608zz bearing.
3: Bed arms left and right to use 16mm tube
4: The feet will need to be trimmed or scaled up to take 25mm pvc. I just trimmed them and used a plumbing joiner to go from the default feet to the 25mm pvc pipe. They are only like 50cents from bunnings. I Was too impatient to change the stl.
5: The Z mount top I also skipped changing the stl file and just used Emery cloth / sandpaper to make the 6805Z bearing fit the 25mm aluminium pipe since it’s ID is 25mm.
If I were to do it again I wouldn’t sand it and just change the z_mount_top stl and just go to the next size up from the 6805Z bearing so the 25mm pipe fits easily. You would also need to change the 09-22mm_6805_bearing_adaptor stl file that fits over the pipe to accommodate this change.
I’ll update later when I finish assembly
I can print parts for australian users, I’m starting to make one myself, almost complete printing the files. The more making it the easier it will be trying to fix problems as a group.
I ran into problems with the copper pipes in 15mm and 22mm not being available here in Australia. So I had to change a few of the files to try to get around it.
Also the feet had to be changed as the PVC pipe OD 32mm also doesn’t exist here or is hard to find. Anyway it can now be made from 16mm and 25mm OD “1mm thick” aluminium tubing and 25mm PVC pipe from bunnings after I changed some files. Will post some pics when I start to assemble it this weekend.
