Part Printing / Slicing

[cn]

This may be an obvious question answered somewhere∞, and I’ve missed it:

What slicing settings should we be using for Morgan parts?

Nicholas Seward has suggestions for GUS Simpson part printing: http://reprap.org/wiki/GUS_Simpson_bill_of_materials#Printed_Parts

I thought I would ask before I start trying to re-re-re-calibrate* my Mendel to print parts

∞ I see various replies from Quentin in other topics but not a grouped set (perhaps a sticky topic? if these forums support such a thing) of settings per part

* had a few electronics hiccups/disasters : ]

[Quentin Harley]

The GUS way sounds fine. I would print the parts with thread a bit finer though – 0.2 is better for those parts.

[Author]

Posts