New assembly instructions ready

All good things Forums Morgan Builders forum New assembly instructions ready

Viewing 3 reply threads
  • Author
    • #1162

      Hi Quentin,

      I’ve made some explosion-drawings of the important parts of the Morgan, based on my virtual Morgan and published them in the RepRap-Wiki:

      Feel free to use them or let me know if you have special wishes for different drawings.
      I’ll translate the BOMS in the drawings to english within the next minutes.

      Greetings from Germany
      (perfect weather today, so I’m working outdoors)

    • #1164

      Yer! Good job!

    • #1187

      Hello Quentin,

      I’ll correct my virtual Morgan and let Inventor refresh the drawings. 🙂

    • #1208
      Quentin Harley

      Thanks again. I just used it to assemble another drive arm before tomorrows potential kit build-off at House 4 Hack. Works great!

    • #1186
      Quentin Harley

      Hi Robert,

      The new drawings are fabulous.

      One or two things though:

        Psi arms have only one M8 nut beween the washers at the joint.
        Theta arm joints only need one 608 bearing. The nut is simply bolted on to the other side

        Everything else seems to be in order. Nice work!

    • #1188

      Okay. All corrections done.

      I needed to correct some parts, because my (little) faults had consequences of course and anything has to fit perfect in my virtual Morgan.

      All necessary parts are updated and the assembly instructions as well.

      Any further tips, critics or recommendations are welcome.


Viewing 3 reply threads
  • You must be logged in to reply to this topic.