Forum Replies Created
-
AuthorPosts
-
pumpkinwaffle
ParticipantWell that’s all the parts ordered. I’ll be missing a couple of screws, rods and pipes but I’ll get that by the time the parts arrive.
I’ll be sure to post updates on the build. Excitement is at its peak 8)
pumpkinwaffle
ParticipantThanks for the answer, I too have great hopes for the e3d. From what I’ve read it grants finer results with PLA but is a bit trickier to get right. It’s also a bit taller but that can easily be solved by making the copper pipe/threaded rod longer. I’ll hold off buying it until I get an opinion on it from you.
Defects on cheap ebay parts are to be expected but as you get more of them I suppose it’ll even out, sadly enough in france there are few shops to get parts from and they’re all way more expansive than ebay. I might place on order from a shop in the US but I’m worried import fees will be a killer.
I must have missed that article on the drivers, awesome to see they can improved!
It’s nice to see the build platform can be handmade and doesn’t require exactness, 100€ for a pre made one is plain ridiculous.
Turns out I’m going to be making two morgans, a friend will help my acquire the parts for the first one, in order to print the second one. 😀
Any chance you could send me the blueprint of your build platform?
edit:
Just realized the e3d v6 is out, I’m sold, it looks simply amazing. I doubt the direct extruder would work on the morgan but once the printer is actually put together I might look into implementing it. Printing flexible plastics would be pretty cool.pumpkinwaffle
ParticipantOne last thing to consider is the stepper driver.
I plan on using only nema 17 0.9degrees for the sake of simply buying one bulk.
I was going to with those:
http://www.ebay.com/itm/221412335628?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649I don’t know if they are the right choice. Hoff70 had one dud which isn’t so bad I suppose, although I’m yet to figure out what the modifications he did to them actually do.
pumpkinwaffle
ParticipantWould you mind explaining what you did with that jumper wire and what is wrong with those drivers? I was thinking of ordering the the same drivers but seeing how you’re having issues with it it’s making me reconsider.
pumpkinwaffle
ParticipantAlright guys!
I’ve got all the printed parts, I’m lasercutting the platform next week, and I’m about to order the last few things I’m missing.
Out of the whole list there are only two items that I am still unsure about.
Regarding the hot end the J-heads are pretty tough to find in france, I’m also strongly considering a e3D hotend, they sound pretty good on paper (and were recommended to me already).
Would an E3D hot end be compatible with the morgan out of the box?
http://e3d-online.com/E3D-v5/v5-Full-Kit/E3D-V5-3mm-Bowden-All-Metal-HotEndOtherwise if some has a link for a shop in europe selling genuine J heads it would help. E3D are a little on the expansive side.
Last but not least I don’t know where to find the universal build plate. I understand it’s lasercut but is it simply made out of wood? Or if it should be metal can it be bought somewhere online?
pumpkinwaffle
ParticipantIndeed threaded rods are actually closer to 7€, I guess last shop I visited was way overpriced. I’ve never come across them for 2€, then again, I don’t have a access to a big DIY store.
Either ways the drill bit is already ordered and I bought some threaded rods. It’s about waiting for things to get here.
I’ll resume printing the parts when the holidays are over. With a bit of luck I should have everything done by july.
hfisselier Je pourrais t’aider avec plaisir, bien que pour l’instant je n’en suis qu’au stade de collecte des matériaux. J’ai déjà fait quelques recherches surtout au niveau de l’électronique. Le reste semble juste être une question d’assemblage. Par contre pour ce qui est de la calibration ça reste a voir 🙂
En tout cas tu trouveras mon email ici:
http://pumpkinwaffle.net/contact.htmlSi tu as besoin d’un coup de main n’hésite pas!
pumpkinwaffle
ParticipantThere’s something beautiful about using a drill bit for the z drive. I can see how you’d get better performance with it than a threaded rod.
Either ways threaded rods are quite expansive in France, I don’t mind spending 16€ on a drill bit when a threaded rod would be 10€.
Now let’s play the waiting for the postman game 🙂
pumpkinwaffle
ParticipantThanks for pointing out where to get the SDS! I had definitely underestimated the availability and cost of a lot of the vitamins.
My mistake regarding the timing belts, I mistook the pulleys (2 listed) for the belts. The BOM calls for T2.5 pulleys, are T2 pulleys actually better suited?
Well that’s nearly all the vitamins ordered, I should be able to put the “shell” together pretty soon!
pumpkinwaffle
ParticipantWell that’s just amazing! The detail on such a small scale is truly impressive.
I’ve been hunting down more parts and once again I’m back with some questions.
While the timing belts T2.5 are self explanatory, after them on the BOM is mentioned Timing belt without any detail, looking at the assembly guide I don’t see a third timing belt used so I’m quite puzzled about it. Is it actually needed, and if so what measurements and where to use it?
I’m also having a bit of a hard time with the Lead screw 330m Alpen8mmSDS. From what I understand It’s a drill bit (seen on some videos of morgan) but it’s displayed as a threaded rod in the reprap magazine assembly guide. If anyone could point me towards an ebay link for one (shipping to europe preferred) I would greatly appreciate it.
pumpkinwaffle
ParticipantSo much support and feedback, thanks guys! 🙂
I think I should definitely opt for a good quality hot end probably with .5 and .35 nozzles for versatility (In the end I’m aiming at the finest detail possible, print time isn’t an issue).
Budget being what it is I’m going to have to go with the cheap fundiuno/ramps set but I’ll make sure to check everything before firing it up.
pumpkinwaffle
ParticipantI’m considering ordering a few things soon, any change someone could tell me if these are the right parts/prices?
This seems like a pretty sweet deal, although there is little details on the stepper drivers:
http://www.dx.com/p/funduino-3d-ramps-1-4-3d-control-board-set-red-304187#.U1EEnFdTo1JNow sure nozzle sizes are a matter of taste and experimenting but would 4mm be a good in size to start with? It seems a bit pricey for a j head, anyone know where I could get a better deal?
http://www.dx.com/p/diy-3d-printer-reprap-j-head-mkiv-mkv-hot-end-nozzle-multicolored-0-4mm-100cm-cable-244712#.U1EFHldTo1IThere so many places to get parts and so many variations on them it’s really tough to make a choice without experience ^^
Oh and one last thing, I haven’t seen any information regarding the thickness of the wood for the platform. Logic is telly me it doesn’t truly matter but still, is there a preferred thickness?
pumpkinwaffle
ParticipantOh fair enough,
Somehow I thought that whole 12mm would have more of an impact on the hardware, that’ll good then.
Thanks
pumpkinwaffle
ParticipantI was actually referring to the hardware parts like the threaded rods, the ball bearings and such..
pumpkinwaffle
ParticipantWood staining is definitely an option, although I was thinking about acetone ink transfer probably some steampunk-ish design, we’ll see.
I’m starting now to gather the hardware parts to put the printer together while I wait for the electronics. Since I’ve gone for the 12mm build however I’m just wondering if someone could list me what pieces are replaced with what? I couldn’t find a 12mm BOM.
Thanks you guys for your patience and all the great help.
pumpkinwaffle
ParticipantWell you sure are quick 🙂
I only managed to print one piece of the morgan today (z mount top) as another student made a 7 hours long print, of course being for a project related to school work he had priority, but I’m in no rush and I’ll continue printing next week.
I did pick the mk2 motormounts seeing in the blogpost that they solved some issues with the morgan. I’m also going with 12mm pieces.
In the end the platforms will be made out of wood on my build, as nice as plexligass would be the prices made me jump out of my chair.
I’m hoping to have the hardware part the machine finished by the end of the month, and the rest will come depending on my student’s budget. Hopefully I’ll have done before summer so that I can use all that spare time away from school printing 😀
-
AuthorPosts

