Calibration Problems

This topic contains 3 replies, has 2 voices, and was last updated by  Quentin Harley 2 years, 7 months ago.

  • Author
    Posts
  • #6451

    vallerap1
    Participant

    Hi Quentin!!
    I already have my morgan in home, and the machine goes to home with normality, But when i use the comand m360 the morgan moves a bit and the motors start to make sounds like its trying to move but it can do it. The motors move good when i homing.
    Thanks for the help!

  • #6454

    Quentin Harley
    Keymaster

    What firmware and electronics?

  • #6455

    vallerap1
    Participant

    Hi!
    Thanks for the answer
    I use a ramps with arduino mega and marlin . But i think its something in the firmware but i and a noob because in the past the m360 move a very very litle the arms and i can moved but when i move the arms to try put the THETA in position the arms star to move go around the top platform, in this point i already move the arms a good distance. Later to solve the problem i change something in the marlin and happen what i said first. Other thing its i cant move the arms without m360 because the motor star to make sounds again. So i used m360 after homing, the arms move a very litle distance in that moment i move the arms and the motor start to make sounds.
    Thanks for the pacient!!

  • #6487

    Quentin Harley
    Keymaster

    Looks like I need to relook Marlin compatibility for Morgans.

You must be logged in to reply to this topic.